Precision · Reliability · Innovation

Press / Shear Control

PSC™ software module is engineered specifically for controlling press and shear applications — embedded within the drive controller to eliminate external control racks.

Press / Shear Control

Embedded Press / Shear Control

Press / Shear Control PSC™ software module is engineered specifically for controlling press and shear applications. The program is embedded within the controller eliminating the need for an external control rack.

When used in conjunction with a programmable controller, the drive forms a powerful automation work cell that can either stand-alone or be easily integrated with other automation cells to build a complete control system. Embedded control reduces system complexity while taking full advantage of the exceptional performance, flexibility, and ease of use of drives.

Modes & Functions

Purpose-built control features engineered for precision, flexibility, and throughput on every press and shear application.

Programmable Speeds

The program provides four preset request speeds for use during automatic operation. The requested velocity is passed to the drive routine, which rate-limits the command velocity using the acceleration and deceleration time setups. The request velocity can also be supplied via a serial interface or an analog input.

Programmable Press Position Outputs

Eight programmable real-time outputs indicate discrete press positions, eliminating the need for mechanical cams. The outputs offer advance and retard delays based upon press speed. The press must be referenced to provide cam outputs.

Transducer / Transducerless Design

The control can operate with or without a feedback transducer. Typically, an incremental encoder is used for position and velocity feedback, although multiturn absolute encoders and single-turn resolvers are also supported.

Spinning Load

A spinning load feature allows the drive to pick up where it left off whenever it is shut off with the motor still spinning. When the motor is turned back on, the drive will accelerate to synchronize with the spinning load.

Regeneration Limiting

A regeneration limiting feature prevents the overpowering of the dynamic braking resistors by limiting the power output during deceleration.

Regeneration Disable

A regenerative current disable feature allows the user to remove all regenerative or reverse currents when the drive is at speed.

Automatic Air Counterbalance

Adaptive current control lets the drive adapt its current limit to the energy needed during a press cycle. This reduces the magnitude of the current variations that result from an unbalanced press and varying load. The software provides a torque-equalizing method that can be used to determine when the torque between the up and down strokes is imbalanced. This can also minimize power consumption by providing an adjustment to counterbalance pressure.

Lube and Air Pressure Faults

The software can monitor critical air and lube flows, setting a warning to the operator or interrupting operation if a fault is detected.

Communications

A variety of communication protocols are supported for interfacing with a programmable controller or other devices. The specific protocols available depend upon the drive used. Refer to the appropriate 1100 or 2000 series drive brochure for details.

Programmability

The control can be customized to a specific installation using UEdit™, a powerful Windows-based programming tool that lets users add their own ladder logic and function block programming.

Inputs & Outputs

A variety of input/output functions are provided for integrating the rotary cutoff control with external devices. The user can select the functions required by a given system and specify their corresponding hardware or serial I/O points.

Input & Output Reference

Standard I/O functions available for integrating the Press / Shear control with external devices.

Input Output
motor onmotor on
fault resetno fault
jog forwardno warning
jog reversemanual
fast stopauto
motion enablemotion
autoforward motion
referencereverse motion
manualat zero velocity
acceleration 1at request velocity
clutch engagedat maximum velocity
press upreference
press downcam 1
DC field oncam 2
motor thermalcam 3
motor blowercam 4
velocity select 0cam 5
velocity select 1cam 6
velocity select 2cam 7
velocity select 3cam 8
motor rms warning
inverter thermal warning

Ready to optimize your press or shear line?

Talk to our engineers about the PSC™ module for your application.

Request a Quote

Industry Leaders

We are proud to partner with some of the most respected names in manufacturing and industrial processing.

Client 1 Client 2 Client 3 Client 4 Client 5 Client 6 Client 7 Client 8 Client 9 Client 10