Precision · Reliability · Innovation

500 Variable Frequency AC Drive

The Series 500 variable speed AC drives offer both variable-frequency (V/Hz), sensorless or closed loop vector control.

500 Variable Frequency AC Drive

Versatile Variable Frequency AC Drive

The Series 500 variable speed AC drives offer both variable-frequency (V/Hz), sensorless or closed loop vector control.

Engineered for a wide range of industrial applications — from simple fan and pump control to demanding high-precision torque and speed regulation — the Series 500 delivers reliable performance across the power range of 0.5 HP to 600 HP.

Features & Specifications

Comprehensive technical data covering features, electrical specifications, performance, I/O, and protection.

Key Features

  • Compact design offering high power density
  • Sensorless vector (SVC), feedback vector (FVC), or voltage/frequency (V/F)
  • Precise torque and current control
  • Starting torque — 150% SVC, 180% FVC
  • Auto torque boost for tough V/Hz applications
  • Easy programming and auto-tune functions for quick commissioning
  • Flexible programmable I/O connection
  • Supports up to 10 frequency reference settings (digital, analog voltage, analog current, pulse, communication)
  • PID control for external processes
  • Power dip ride-through
  • Master-slave speed or torque control
  • UL, cUL, CE Listed
  • Roll-in inverters for easier installation/service — 250 HP to 600 HP
  • Flange mounting for better thermal management — up to 200 HP
  • Conformal coated modules as standard
  • Built-in dynamic brake IGBT — up to 100 HP
  • Built-in DC link reactor compliant with EN 61800-3 — 25 HP to 600 HP
  • Standard LED keypad with start/stop buttons

Electrical Specifications

Input Supply

  • Voltage: 380 to 480 V AC, three-phase, phase sequence insensitive
  • Voltage tolerance: –15% of minimum, +10% of maximum
  • Frequency: 47 to 63 Hz
  • Displacement power factor: 1.00 at all loads and speeds
  • Overall power factor: 0.92 at rated load
  • Power range: 25 to 600 HP

Output Supply

  • Voltage: Zero to input supply voltage, three-phase
  • Frequency: Zero to 500 Hz
  • Switching frequency: 0.8 to 8 kHz

Service Conditions

  • Efficiency: 97% nominal at rated switching frequency
  • Overload current: 150% of rated for 60 sec
  • Power range: 0.5 HP to 600 HP

Environmental

  • Operating temperature: 32° to 104° F (0° to 40° C); derating required 32° to 122° F (50° C)
  • Storage temperature: –40° to 140° F (–40° to 60° C)
  • Operating humidity: 95% maximum, non-condensing
  • Altitude: To 3,300 ft (1,000 m) without derating
  • Vibration: Less than 5.9 m/s² (0.6 G)

Performance

Frequency Control

  • Range: Zero to base speed at full torque; base speed to twice base speed at constant power
  • Resolution: 0.1 Hz with digital input; max frequency × 0.025% with analog input

Velocity Control

  • Range: Zero to base speed at full torque; base speed to twice base at constant power
  • Regulation: ±0.001% of base speed down to zero with transducer; ±0.5% of base speed at 2 Hz and above without transducer

Torque Control

  • Starting torque: Zero to 150% (SVC), 180% (FVC) of rated
  • Regulation: ±3.0% of maximum with transducer; ±5% of maximum without transducer for 10 Hz and above

Inputs & Outputs

  • Analog Inputs: Two 12-bit (0 to 10 VDC or 0 to 20 mA)
  • Analog Outputs: One 12-bit (0 to 10 VDC and 0 to 20 mA)
  • Digital Inputs: Five
  • Digital Outputs: One open-collector driver rated 24 VDC @ 50 mA; one high speed – 100 kHz (OC 24 VDC @ 50 mA)
  • Relay Outputs: One NO/NC 250 VAC 3 A or 30 VDC 1 A
  • Serial: RJ485 for remote keypad and display unit

Serial Communications

  • CANLink module with additional I/O
  • Modbus RTU module with additional I/O
  • Profibus-DP module
  • CANopen module

Mounting

  • Enclosure Option: IP20 from 0.5 HP to 50 HP (NEMA 1 with a kit)
  • NEMA 1 standard 60 HP to 200 HP
  • Chassis greater than 250 HP
  • Flange Mounting: less than 200 HP
  • Roll-in Inverters: greater than 200 HP

Options

  • LCD Alpha-Numeric menu-driven keypad with parameter storage
  • Encoder (pulse generator) module
  • Resolver feedback module
  • Expanded digital and analog IO with Modbus RTU module
  • Expanded digital and analog IO with CANlink module

Hardware & Software Faults

Combination of hardware detection and software faults that are available.

Fault Type Fault Type
Overcurrent during accelerationCommunication fault
Overcurrent during decelerationMotor auto-tuning fault
Overcurrent at constant speedEncoder fault
Overvoltage during accelerationPID feedback lost during running
Overvoltage during decelerationSpeed error
Overvoltage at constant speedMotor overspeed
UndervoltageMotor overtemperature
AC drive overloadBraking unit overload
Motor overloadShort-circuit of braking circuit
Phase loss on input sideExternal fault
Phase loss on output sideBack EMF auto-tuning fault
IGBT overheatLoad loss
Short-circuit to ground
Current detection fault

Need a Series 500 drive for your application?

Talk to our engineers about the right configuration for your needs.

Request a Quote

Industry Leaders

We are proud to partner with some of the most respected names in manufacturing and industrial processing.

Client 1 Client 2 Client 3 Client 4 Client 5 Client 6 Client 7 Client 8 Client 9 Client 10